GNG Series

For die-set

Million grease · Million oil · Special order applications·precision die-set


Standard set size figure

Standard set size figure - GNG Series

Notes
Select a length for the post drawing bolt according to the calculation formula on page 46 and use it. If the bolt is short, the post may be fractured due to concentrated stress on the thread part at the time of drawing.
See page 46 for details.

Standard set dimension table

Standard set dimension table

Standard set dimension table

※1 L size is 5mm pitch (only GNG60, 80, 100 are 10mm pitch)

※2 Effective stroke: Usable stroke range where the retainer does not protrude from the end of bush. Please contact us if you want longer   stroke as a special order.

※3 We can provide a retainer of LL = 194. Please contact us.






Optional item size figure

Optional item size table

※RL size is 5mm pitch (only GNG40 - 100 are 10mm pitch)

※Million guide employs retainer and the retainer may shift in some conditions. Use Million guide within the effective stroke so that it is effective to mitigate the position shift by using within the range where the retainer does not protrude from the bush. Please contact us on another way "spring insert" to restrain the retainer shift.

※GNG6, 9, 16 are square shape, GNG80 is octagonal shape, and others are hexagonal shape.

※GNG series include a post, a bush, a retainer & an end cap as the standard set.

※Bush outer diameter tolerance of GNG80, 100 are ±0.005.

※We also provide dust-proof boot by special order. Please contact us.



Order type of standard set · Order type of optional parts alone


Material Table

Material Table